双色球走势

師資隊伍

李樹豐

姓名: 李樹豐 

性別: 男 

籍貫: 陜西省武功縣 

政治面貌: 黨員 

出生年月: 1973.10 

職稱: 教授 

郵箱: [email protected]    

學習經歷(本科起)、任職經歷及社會兼職情況    

學習經歷    

2006-2009  日本大學理工學研究科機械工學專業, 工學博士。    

2002-2005  西安理工大學材料科學與工程學院,材料學碩士。    

1993-1997  西安理工大學材料科學與工程學院,材料加工學士。    

工作經歷    

2013-至今  教授,西安理工大學 材料科學與工程學院。    

2011-2013  講師,大阪大學接合科學研究所。    

2009-2011  博士后研究員, 大阪大學接合科學研究所。    

2002-2005  講師, 西安理工大學材料科學與工程學院。    

1997-2002  助教, 西安理工大學材料科學與工程學院。    

社會兼職    

日本機械學會正式會員    

日本粉末冶金協會正式會員    

日本金屬學會正式會員    

擔任期刊Carbon, Materials Science & Engineering A, Composites Science & Technology,Materials & Design 等審稿人;    

主要研究方向、教學和科研成果、科研項目    

研究方向    

主要致力于粉末冶金、金屬及陶瓷基復合材料的研究,包括高強度無鉛易切削黃銅合金;鈦基復合材料以及碳納米管增強鋁、銅基復合材料的研究。    

獲獎情況    

1) 2014年日本文部科學大臣科學技術獎;2014.03    

2) 2013年日本粉末冶金協會2013年研究進步獎;2013.05    

3)陜西省百人計劃特聘專家稱號;2012.09    

4) 日本文部省(MEXT)國費獎學金;2009.10    

代表性榮譽、著作介紹    

代表性著作 

  1. Shufeng Li*, H. Izui, M. Okano, Densification, microstructure and behavior of hydroxyapatite ceramics sintered by using spark plasma sintering. Journal of Materials Engineering and Technology, 130 (2008), 031012. (SCI: 0.938, UT WOS:000257133100013,  4區)

  2. Shufeng Li*, Hiroshi Izui, Michiharu Okano, Weihua Zhang, Taku Watanabe, Fabrication of hydroxyapatite-incorporated ZrO2-20wt%Al2O3 by Spark Plasma Sintering and characterization, Journal of Composite Materials, Vol.43, No.14, 1503-1517, 2009. (SCI: 1.034, UT WOS:000267185000002, 4區)

  3. Shufeng Li*, Katsuyoshi Kondoh, Hisashi Imai, Haruhiko Atsumi, Fabrication and Properties of Lead-free Machinable Brass with Ti Additive by Powder Metallurgy, Powder Technology, 205 (2011) 242–249, doi:10.1016/j.powtec.2010.09.020 (SCI: 1.745, UT WOS:000284787900030, 3區)

  4. Shufeng Li*, Hisashi Imai, Haruhiko Atsumi, Katsuyoshi Kondoh, Effects of Ti Addition on Microstructure and Mechanical Properties of Extruded Cu40Zn-2.2Bi Brass by Powder Metallurgy, Steel research international, 2010, 1312-1315. (SCI: 0.313, WOS:000208594600324,  4區)

  5. Shufeng Li*, Hisashi Imai, Haruhiko Atsumi, Katsuyoshi Kondoh, Contribution of Ti addition to characteristics of extruded Cu40Zn brass alloy prepared by powder metallurgy, Materials and Design, 32 (2011), 192–197. (SCI: 1.518, UT WOS:000282242300024,3區)

  6. S. Li*, H. Imai, H. Atsumi, K. Kondoh, Phase transformation and precipitation hardening behavior of Cr and Fe in BS40CrFeSn alloy, Journal of Materials Science, 45, (2010), 5669-5675. (SCI: 1.471, UT WOS:000280959200031,3區)

  7. S. Li*, H. Imai, H. Atsumi, K. Kondoh, Characteristics of High Strength Extruded BS40CrFeSn Alloy Prepared by Spark Plasma Sintering and Hot Pressing, Journal of Alloys and Compounds, Vol. 493, No.1-2, (2010),128-133. (SCI: 2.135, UT WOS:000276054200035,2區)

  8. Shufeng Li*, Hiroshi Izui, Michiharu Okano, Weihua Zhang, Taku Watanabe, Microstructure and mechanical properties of ZrO2 (Y2O3)–Al2O3 nanocomposites prepared by spark plasma sintering. Particuology 10 (2012) 345–351. (SCI: 1.423, UT WOS:000305299500013,3 區)

  9. Bin Sun, Shufeng Li*, Hisashi Imai, Junko Umeda, Katsuyoshi Kondoh; Synthesis kinetics of Mg2Si and solid-state formation of Mg–Mg2Si composite, Powder Technology 217 (2012) 157–162. (SCI: 1.745, UT WOS:000301159500020, 3 區)

  10. Shufeng Li*, Hisashi Imai, Haruhiko Atsumi, Katsuyoshi Kondoh, Akimichi Kojima, Yoshiharu Kosaka, Koji Yamamoto, Motoi Takahashi, The effects of Ti and Sn alloying elements on precipitation strengthened Cu40Zn brass using powder metallurgy and hot extrusion, Materials Science and Engineering A 535 (2012) 22–31. (SCI: 2.003, UT WOS:000301402400004,2 區) 

  11. Shufeng Li*, Hisashi Imai, Haruhiko Atsumi, Katsuyoshi Kondoh, Akimichi Kojima, Yoshiharu Kosaka, Koji Yamamoto, Motoi Takahashi, Development of precipitation strengthened brass with Ti and Sn alloying elements additives by using water atomized powder via powder metallurgy route. Materials Chemistry and Physics, 135 644-652 (2012). (SCI: 2.234, UT WOS:000309247500059,2 區)

  12. Shufeng Li*, Hisashi Imai, Katsuyoshi Kondoh, Akimichi Kojima, Yoshiharu Kosaka, Koji Yamamoto, Motoi Takahashi, Dependence of microstructure and mechanical properties on hot-extrusion temperatures of the developed high-strength Cu40Zn-CrFeTiSn brass by powder metallurgy, Materials Science and Engineering A 558(2012), pp. 616-622. (SCI: 2.003, UT WOS:000311249800084,2 區)

  13. Shufeng Li*, Bin Sun, Katsuyoshi Kondoh, Takanori Mimoto, Hisashi Imai, Powder Metallurgy Titanium Metal Matrix Composites Reinforced with Carbon Nanotubes and Graphite, Composites Part A: applied science and manufacturing, 48 (2013) pp. 57-66.   (SCI: 2.695, 2 區)

  14. Bin Sun, Shufeng Li*, Hisashi Imai, Takanori Mimoto, Junko Umeda, Katsuyoshi Kondoh; Fabrication of high-strength Ti materials by in-process solid solution strengthening of oxygen via P/M methods,  Materials Science & Engineering A 563 (2013) 95–100 . (SCI: 2.003,  WOS:000315063000013,  2 區)

  15. Haruhiko Atsumi, Hisashi Imai, Shufeng Li, Katsuyoshi Kondoh, Yoshiharu Kousaka, Akimichi Kojima,  Fabrication and properties of high-strength extruded brass using elemental mixture of Cu40% Zn alloy powder and Mg particle, Materials Chemistry and Physics 135 (2012) 554-562. (SCI: 2.234, UT WOS:000309247500046, 2區)

  16. Haruhiko Atsumi, Hisashi Imai, Shufeng Li, Katsuyoshi Kondoh, Yoshiharu Kousaka, Akimichi Kojima, High-strength, lead-free machinable α-β duplex phase brass Cu-40Zn-Cr-Fe-Sn-Bi alloys, Materials Science and Engineering A 529 (2011) 275-281. (SCI: 2.003, UT WOS:000297391700038, 2 區)

  17. Hisashi Imai, Shufeng Li, Katsuyoshi Kondoh, Yoshiharu Kosaka, Akimichi Kojima, Haruhiko Atsumi; and Junko Umeda, Effect of Chromium Precipitation on Machinability of Sintered Brass Alloys Dispersed with Graphite Particles, Materials Transactions, Vol. 52, No. 7 (2011) pp. 1426-1430.  (SCI: 0.787, UT WOS:000294389000014,4 區)

  18. H. Imai, Y. Kosaka, A. Kojima, S. Li, K. Kondoh, J. Umeda, H. Atsumi, Characteristics and machinability of lead-free P/M Cu60Zn40 brass alloys dispersed with graphite, Powder Technology, 198, (2010), 417-421. (SCI:1.745, UT WOS:000275307800013,3 區)

  19. H. Imai, S. Li, H. Atsumi, Y. Kosaka, A. Kojima, K. Kondoh: Development of Lead-Free Machinable Brass with Bismuth and Graphite Particles by Powder Metallurgy Process, Materials Transactions, Vol.51, No.5, (2010), 855-859. (SCI: 0.787, UT WOS:000279337800006, 4區)

  20. Hisashi Imai, Katsuyoshi Kondoh, Shufeng Li, Haruhiko Atsumi, Yoshiharu Kosaka, Akimichi Kojima, Effect of Bismuth Addition on Machinability and Mechanical Properties of Lead-Free Brass via Powder Metallurgy Process, Steel research international, (2010) 1296-1299. (SCI: 0.313, 4區)

  21. Shufeng Li*, Bin Sun, Hisashi Imai,  Katsuyoshi Kondoh, Powder Metallurgy Ti-TiC Metal Matrix Composites Prepared by In-situ Reactive Processing of Ti-VGCFs System, Carbon, 61 (2013 ) 216-228. (SCI: 5.378, 1 區)

  22. Li*, H. Imai, H. Atsumi, K. Kondoh. An investigation of microstructure and, phase    transformation and precipitation behavior of Cu40Zn-1.0 wt% Ti brass via powder metallurgy, Journal of Materials Engineering and Performance, 22, 10 (2013) 3168-3174. (IF: 0.855,4區)

  23. S. Li, H. Imai, K. Kondoh, Microstructure, Phase Transformation, Precipitation Behavior and Mechanical Properties of P/M Cu40Zn–1.0 wt% Ti Brass Alloy via Spark Plasma Sintering and Hot Extrusion, Journal of Materials Science & Technology (2013), 29(11), 1018-1024. (SCI: 0.759, 4區)

*: Corresponding author

双色球走势